Cleaning Tank 1gal.

This tank is great for cleaning sugrical instruments and small parts. You can get by using less solvent. The heaver paractials will stay below the screen. The medal screen insert immerses parts in the solvent with the lid closed keeping a cleaner work area.

• Parts Screen.
• Spring Loaded Rack.
• Hinged Lid (Locking).
• One Gallon Capacity.
• 8"x5-1/4".
• Will hold 3-1/2lbs of instruments.
• Handles for easy storage.

Part No. 635400 ___$ 19.95

Light Magnetic 
Base 75 Watts

This arm light has three fully functional joints plus a fourth joint rotates the lamp 360 dergrees. Magnetic base holds firmly to drill presses, milling machines, lathes, most any machine, With 6' cord, 120vac (Bulb not included). 

• Magnetic Base
• Swivels 360 dergrees
• 6' electrial cord
• 75 watt 

Part No. 632263 _____$ 16.99

Sanding Disks 6"

These Sanding Disks are very high quality Aluminum Oxide. Unlike most other common discs these are double bonded giving a thicker layer of grit that will last at least twice longer. This is a very good buy. Great for sharpening Tungsten Carbide Implanted Scissors. The pull tabs make it easier to release the protective backing, making a quicker change saving time and money.

• Quality Stick Back PSA 
• Easy to Change Doubled Bonded 
• Pull Tab Backing

KK511 180 gt_____$43.50

KK512 220 gt_____$59.50

Ratchet Spring

• Stainless Steel OEM.
• Use on the Alm Retractors
• With Screw

This Gold Solution is specially formulated for Gold Plating direct onto stainless steel surgical hand instruments. This Contains the maxium amount of gold. Very high content. One Quart Bottle 

Part No. 600069__$68.00

3 Qts___________$163.00

Pin Vise 4pc. Set

Size: 0-.04",.03-.062",.055-.12",.115-.187"

This Pin-Vise Set is made of heat tempered spring steel, with hollow shaft, allowing long drill bits to fit inside at the right length. Knurled handles. 

Part No. PVS463_$ 14.95

Locking Spring

• Stainless Steel OEM.
• Use on the Castroviejo Needle Holder.
• The pair comes with 1.7mm screws.
• 36 mm between screw holes.

• Stainless Steel OEM.
• Use on the Castroviejo Needle Holder.
• The pair comes with 1.7mm screws
• And index locking pins
• 36mm between screw holes.

Heat Guard 8oz.

This Heat Guard Paste stops heat cold on surgical instruments when using the torch. Heat will not travel past the paste.

• Apply generous amount of Heat Guard to the surrounding surface of the instrument that you want to protect from the heat.
• To remove, ricse with water until clean.

                     Pk of 3$37.99

Diomand Disk
13/16"x.022Thkx1/8Hole

These disks are covered on both sides with high quilty diamond chips. 

• Fine diamond chips
• Use as a cut off wheel
• Use for polishing
• 13/16"D x .022Th x 1/8"Hole
• Excellent for cutting Stainless Spring Steel
• 22,000 rpm

                           Pk of 3 $18.99

Buffing Wheels 10"

These buffing wheels are the very best for stainless steel instruments. 

• 10"Rnd x 1/4"Th x 3/4"Hole
• 60x60 thread per Inch
• White muslin coton
• Spirel sowen 3/8"
• 20 Ply
• Stake 3ea for 3/4"Th (Best)

Silver Paste 24g

Never use Stick or Ribbon Silver again. This Silver Paste is easier to use than all other kinds of silver. No flex is needed, this paste is formulated for the use with Stainless Steel and other metals. No flex residue to clean up. Will save money due to the fact you use only a drop on the surface and flows outward making a better bond with no air pockets. 

1. One unit will last over 250 Needle Holders
2. Never need to use Flux
3. No Clean Up needed
4. Cost's less to use, no wast

• Part No. SP-200 24g per Unit$42.00 
Ask to become a dealer for this product